YG1 83595 5/8″ Size, 7/8″ LOC, 3 Flute, Bright Solid Carbide Finishing End Mill Markdown

Applications

For finishing operations on non-ferrous materials, the YG1 83595 end mill features a 5/8″ diameter and a short 7/8″ length of cut with 3 flutes and a bright coating. The 50° helix angle promotes smooth cutting and chip evacuation, minimizing built-up edge particularly in aluminum alloys such as 6061 and 6082. Its stub length-to-diameter ratio of approximately 1.4 provides enhanced rigidity and control, limiting deflection during fine finishing passes. The bright finish combined with the three-flute design optimizes surface quality and chip flow in non-ferrous metals. This single-end, center-cutting tool allows for accurate plunge cuts and detailed contouring. The coating supports clean cuts without degradation risks common in ferrous materials. Hard steels typically machine better with a coated end mill. It is also not recommended for hard or abrasive materials requiring higher wear resistance and coating durability.

Features

• Designed to machine stainless steel, inconel, titanium and other hard to machine materials.
• It’s 3 flute design gives high stability and allows good chip removal in plunging & slotting operations.
• The high rake angle and 50 degree medium helix allows an extremely wide range of application.
• YG:TYLON super TiAlN coating are recommended for maximum performance.