YG1 86598TF 3/4″ Size, 1-5/8″ LOC, 5 Flute, YG TiAlN Futura Solid Carbide Finishing End Mill Brand New

Applications

Optimized for steel finishing, the YG1 86598TF 3/4″ Size, 1-5/8″ Length of Cut, 5 Flute TiAlN Futura Solid Carbide Finishing End Mill delivers precision and rigidity. Its 45° helix angle combined with a 5-flute layout enhances surface finish and ensures effective chip evacuation during light radial stock removal. The tool’s single end and center cutting design facilitate plunge and ramping cuts, allowing controlled tool engagement. The TiAlN Futura coating, together with the high flute count and helix angle, reduces heat buildup and minimizes built-up edge, extending tool life when finishing low carbon steels and similar materials. Its geometry supports smooth cutting and dimensional accuracy without a corner radius, helping to reduce edge chipping through balanced cutting forces. Avoid applying this end mill to Non-Ferrous (ISO N) materials due to coating unsuitability that leads to rapid degradation. This tool is not suited for heavy roughing or interrupted cuts in harder materials beyond its specified range.

Features

• Designed to machining stainless steel, inconels and other alloys.
• The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection.
• 5 Flute and 45 degree medium helix allow harmonic balance and smooth cutting.